LowRider v3 Size Calculator¶
(The photo and drawing below are sized for a 48”x96” available cutting area.)
Usable Cutting Area¶
XZ Plate Thickness¶
Printed Plates are 9.5mm (0.374”), Shop Aluminum plates are 6.35mm (0.25”).
mm XZ Plate
|2||X rails, also the strut plate width|
|1||Y rail (for looks you might want to match your table length)|
|1||Belt length along X|
|2||Belt length along Y|
|total length||belts (all 3)|
|3||Strut length (same as Tube Length)|
Have a look at the SVG file linked above to see how many braces and hose holders you need.
This output is the minimum table required. An extra 25-50mm (1”-2”) or more on each dimension is nice if you will be pushing it up against a wall or in a corner.
|X table size (width)|
|Y table size (length)|